Bronze Bearing perfo 3008100H Sleeve Bronze Bushing

Rolled Bronze Bushing Sliding Bearing with Oil Hole and Oil Grooves, Special Designed Split Bronze Bearing

ZR-092 Bronze bushings are suitable for MBB-Palfinger. The bearings are manufactured of a cold formable homogenous bronze, which provides exceptional material properties. The standard sizes are fitted with holes dispersed in a special way over the whole bearing surface.

These holes with specially designed oil grooves serve as lubricant reservoirs to rapidly build up a lubrication film during startup, thereby reducing start friction.

Material: CuSn8P0.3 (DIN ISO 4382-2:1991)

Material chemical composition refers to the standard of DIN17662 ISO 4382-2:1991; CW453K. The actual composition proportion is allowed to vary within certain ranges based on standard specifications.

• Surface can be incorporated with oil holes and oil grooves linear. Particularly suitable for oscillating bearings
• High load capacity and long life
• Wide temperature range
• Easy to assemble
• Works well in dirty environments
• More cost-effective than traditional bronze bushings

ZR-092 wrapped bronze bushing is widely used in forest and construction machinery, agricultural machinery, cranes, forklifts, hoisting equipment, and similar applications.

• Housing ØH7
• Bushing inner-Ø after mounting H9
• Shaft tolerance f7
• Housing: Mounting bevel min. 1.5 mm x 15-45°
• Shaft Material: Steel, hardened or untempered, surface roughness ≤ Rz 4-6
• Shaft: Mounting bevel 5 mm x 15°, edges rounded
• The application of an adequate force fitting mandrel is advisable
• Grease lubrication of the outer surface may be necessary when mounting
• Stick-in: Adhesive should not contact the sliding surface